Döinghaus cutting and more GmbH & Co. KG

Ultracut Nado

The Nado machine cuts a wide range of products into pieces, freely adjustable in amount and size, by using an ultrasonic cutting blade (sonotrode). • The product is placed on a conveyor belt by the operator. • The machine will automatically feed in the products into the cutting station. • At the end of the cutting process the product will be automatically fed out by the machine. The machine can be operated by one person. Servo drives moves the ultrasonic cutting head to the required cutting position. The desired cutting pattern is entered via an easy to use touch screen. An optional cleaning box allows the cleaning of the blade during the cutting process, controlled by program. The cleaning cycles can be set up in the parameter settings or by the operator by pressing a button on the control panel. The whole machine design is optimized regarding the HACCP guidelines. We are member of EHEDG to promote safe food by improving hygienic engineering and design.

Ultracut Filou

The Ultracut Filou is an automatically working ultrasonic cutting machine to cut blocks or sheets of product in cross- and lengthwise direction and round cakes in portions, lying directly on a cutting table. The cutting process works stepwise. - The products are placed manually directly on a cutting desk in the machine. - Start the program by pushing a button. - Manually take out after cutting process. A knife guard prevents major damage to the knives, which comes through baking sheet contact by deformed sheets. A hygienic cleaning station for cleaning the blade by spraying fresh water on it and drying with compressed air permits an automatically cleaning in periodic intervals. The whole machine is designed for easy and fast cleaning based on the EHEDG guidelines.

Ultracut Terbia Duo

The Terbia machine cuts a wide range of products into pieces, freely adjustable in amount and size, by using ultrasonic cutting blades. • The product is placed on a conveyor belt by the operator. • The machine will automatically feed in the products into the cutting station. • At the end of the cutting process the product will be automatically fed out by the machine. The cutting machine can be operated by one person only. Servo drives moves the ultrasonic cutting head to the required cutting position. The desired cutting pattern is entered via an easy to use touch screen.

IQ-Move

Baking sheet handling with our newly developed IQ-Move Spider, a docking station for rack trolleys and a vertically movable working unit for handling baking trays, with program-controlled removal, cutting and loading of the rack trolley. So far, the ultrasonic cutting machines are usually loaded manually, that means baking trays have to be put on again and again.

USQ Micra

Cutting of the products in crosswise direction by an ultrasonic cutting blade. The cutting machine works step by step or synchronously with the line speed in combination with an external encoder. All axis are servo driven. A touch panel allows an easy handling to change parameters. Depending on the type of products involved, it is essential to select the correct cutting speed in order to ensure high cutting quality and to avoid damage to the blades

Ultracut EOS

The products to be cut are placed in the machine manually. A coded carrier plate system allows easy and accurate centering of the products under the cutting head. A safety light grid on the front protects the operator and switches the machine off immediately when activated. The machine is equipped with two mutually movable ultrasonic knives. These are automatically positioned depending on the loaded recipe.

CUT 600 Dough cutter

The CUT 600 is perfect for cutting biscuit rolls or other strand products. With up to 70 cycles / min and adjustable piece sizes, high productivity as well as flexibility is guaranteed. After the cutting process, the products are automatically deposited on a sheet or optionally conveyor belt, so that a time-consuming manual depositing process is no longer necessary.

Ultracut Filou XL

The Ultracut Filou XL is the consistent further development of the Ultracut Filou, which has proven itself 100 times over. It offers a wide range of options up to a product size of max. 850 x 650 mm.

Ultracut Kondus

Ultracut Kondus – Return system, ideal for one-man operation also as double-head solution The Ultracut Kondus such as the Ultracut Terbia Duo is equipped with two or more hight-adjustable cutters. This machine is designed as a return system. After having completed the cutting system, the product will be returned to the operator. At the same time, a new product will be insert on the other side. Therefore, it is perfectly suitable for the one-man operation. One-man operation High productivity in a small space Intuitive control on the touch screen Cutting head with ultrasonic knives adjustable relative to one another The “Twin” type is equipped with two cutting heads Stainless steel frame with height-adjustable feet Viewing window made of transparent food neutral plastic material Cutting in the baking tray or on the carrier plate Cleaning station with fresh water Integrated Knife Guard Rapid and easy cleaning Easy accessibility Comprehensive recipe management

Sandwichboy

The Sandwichboy cuts sandwiches and stuffed wraps of perfect quality. The products placed on the conveyor belt of the machine will be automatically aligned and conveyed through the cutting area. Then they can be removed from the conveyor belt.

Depositor